How to install.

 

Front View of rb5m model with optional banner sign attached

 

Can be seen from hundreds of metres away!

 

How to put up your new inflatable advertising balloon

 

Step 1. Unpack your parts and laydown on Base Mat. Keep Balloon Folded.

Step 2. (Optional) Fill each Weight Bag, move into positon. 4 outside corners, 4 middles, 4 base mat and 4 Balloon Cup positions.

Step 3. Correctly connect the Blower Fan to your electrical connections.

Step 4. Attach Weight Bag to Cup D Links (bottom of globe)

Step 5. Attach Ropes to Secure Tie D Links. (top of glove)

Step 6. Turn on Blower Fan and inflate to 20 %

Step 7. Tie to Balloon to outside corner Weight Bags, Tie to middles Weight Bags.

Optional. Tie any optional Banner Signs to the belly before inflating to full.

Step 8. Inflate to 100% and adjust any vertical or sideways lean. Adjust ropes or Weight Bag positions.

 

---

Detailed Instructions

---

 

What space do I need?

 

All you need is approximately 2 - 2 1/2 car parks wide ( 5m x 5m) clear space for your diagonal weight bag positions. The design allows very tight free space spans for typical roof and verandah situations. The weight combined is approx 26 kg. We suggest you use upto 100 kg weight bags or solid blocks. Ropes may also be tied to secure structures capable of such. There are plenty of tie off points included on the balloon.

 

 

This picture shows the final blown up design with magnificent coloring. Optional banners can be added very cheap.

 

---

Detailed Instructions

---

How to Inflate

1 person installation tips

 

Step 1. All parts are included ready to use. Take out of the protective bag, fill up your weight bags and connect Blower Fan to the Filler Tube. Keep the Globe folded BUT in the desired inflated position.

 

Tip: layout your Base Mat with all the components.

 

Step 2. Move your filled Weight Bags into position.

 

 

 

Step 3. Attach rope to the bottom globe CUP D Links (bottom of globe)

 

 

Step 4. Attach Ropes to the Secure Tie Down Points (top of globe)

 

 

Step 5. Turn on Blower Fan and inflate to 20%

 

 

Step 6. Tie Balloon to outside corner Weight Bags, Tie Middles to Weight Bags

 

 

 

Step 6 A. Optional: Tie any Banner Sign to the belly D Links before further inflation.

 

 

Step 7. Inflate to 100% and adjust any vertical or sideways lean, adjust Ropes or Weight Bags into correct positons.

 

 

Notes: The system is designed for simple up and down. You can move the globe into position during inflation.

 

How to Deflate

 

Deflation: To deflate your globe, you can turn off the Blower Fan, and, for quick deflation, open the Hook n Loop Doorway Panel.

Remove electrical connections.

Keep your Ropes and Weight Bags in position until the Globe is packed inside your Bag.

Untie any Weight Bags and remove.

 

 

Next > Signs, Banners